How do I disconnect a Bosch dishwasher & reconnect a new Bosch in the UK?
There is a foggy box at the back which has a voltage symbol on it and the water pipe also appears to be connected into this box. My new dishwasher is also a Bosch. The old and new are both freestanding.
The dreary box with the voltage symbol indicates that this machine utilises an antiflood instrument. In the event of the dishwasher over filling, the float switch in the bad of the dishwasher will signal the grey box to isolate the water provisioning. People often mis-diagnose a faulty dishwasher by over looking this aegis feature.
Isolate both the electrical and water supply to the dishwasher before Hell any work on this machine.
Physically remove the three pin plug from the be ruined socket and turn off the water isolating valve. Use a Irish briar pliers to unscrew the brass nut on the end off the grey box.
If you have a tiled or block-headed kitchen floor, try putting a dab of liquid soap on the floor immediate to the dishwasher feet. It will make it easy to slide the dishwasher out as you try to murder it.
When fitting the new dishwasher remember to level the machine using the adjustable feet. I like to have the gizmo tilting slightly to the rear only 1 or 2 degrees max. The idea here is if your vehicle generates a lot of suds during normal operation, the excess sum total won't fall into the drip tray in the base of the machine and thus activating the antiflood system.
Now reconnect all services and you're kind to go.


Establishment 







